Industry · Metal fabrication
Odoo for shops that quote, cut, weld and ship.
Odoo holds each job's actual cost against its quote and keeps every mill cert on its heat number.
Quote to shipment
- Quote accepted, job openedSales
S00217 - Plate reserved by heat numberInventory · Lots
Heat 4471-B - Cut and weldedShop Floor
Op 2 of 4 - Out for galvanizingSubcontracting
P00064 - Weld checks loggedQuality
QC pass - Shipped with certs, cost postedInventory · Accounting
Costed
The build
What we configure in Odoo
Standard apps first, custom code only where it pays.
- SalesQuotes priced from BOM and routing cost; a confirmed order opens the job.
- ManufacturingRoutings for cut, form, weld and finish; usable drops recorded as by-products.
- Lots and traceabilityHeat numbers as lot numbers, mill certs attached, traceability from heat to shipment.
- SubcontractingGalvanizing, plating and paint tracked out and back, vendor charges on the job.
- QualityFit-up and weld checks per operation, measurements with tolerances, alerts tied to the lot.
- Shop FloorTablet job queue per work center, operator time per operation, live job status.
- Inventory and PurchaseReorder rules for stock plate and bar, vendor pricelists, material bought to order.
- AccountingMaterial, labor and outside processing per job, expected against real cost per order.
- QuoteSales
Priced from material, routing time and outside services.
- PlanManufacturing
A manufacturing order with cut, weld and finish operations.
- Cut and weldShop Floor
Heat numbers scanned, time and scrap logged at each station.
- Outside workSubcontracting
Galvanizing or powder coat sent out and received back.
- InspectQuality
Checks recorded before the job ships.
- Ship and costInventory · Accounting
Actual job cost compared with the quote, per order.
The problem
What breaks first in a fab shop
A typical job shop quotes in spreadsheets, runs jobs on paper travelers and keeps mill certs in a filing cabinet.
- Quotes are educated guessesEstimators price from old jobs and a spreadsheet; margin shows at month-end.
- Remnants nobody can findDrops return to the rack unrecorded; the shop buys new plate.
- Mill certs in a drawerMatching a heat number to a job means digging through paper.
- Outside processing goes darkParts sent out for galvanizing, plating or powder coat leave the system.
- Labor never reaches the jobOperator hours sit on timecards, so part cost is an estimate.
- Weld defects found at shippingA bad fit-up surfaces at final inspection, after more labor is spent.
The change
Before and after
What changes once every job lives on one record.
| Area | Before | With Odoo, configured by us |
|---|---|---|
| Quoting | Spreadsheet estimates, margin known at month-end | Priced from BOM and routing, margin per job |
| Material certs | Heat numbers on paper, certs in a drawer | Heat number as the lot, cert attached |
| Remnants | Drops stacked on the rack, never recorded | Drops back in stock as their own lots |
| Outside processing | Parts leave the system when they leave | Tracked out and back, costed to the job |
| Job cost | Labor on timecards, cost per part guessed | Material, labor and vendor cost posted per job |
The plan
The plan for a fab shop
Every proposal carries its own dated plan.
- Phase 1
Scope and process map
Your shop flow and outside processors documented; one fixed price signed.
- Phase 2
Configure
Routings, work centers, lot tracking, subcontracting and job costing set up.
- Phase 3
Migrate, rehearse, train
Open jobs and heat numbers loaded, a parallel run, training by role.
- Go-live
Go live and stabilize
Cutover, 30-day hypercare, then our support desk in Rajkot.
Results
The closest case we have published
No fab-shop case yet; our closest is a custom-parts manufacturer, measured at day 90.
From 3-day planning cycles to same-day scheduling
A custom-parts manufacturer with 85 staff moved 340 BOMs, 12 work centers and its planning from spreadsheets into Odoo MRP in 14 weeks.
FAQ
Common questions
The questions shop owners and estimators ask before scoping.
Can Odoo track heat numbers and mill certs?
Yes. Record the heat number as the lot number when plate or bar is received, and attach the mill cert PDF to that lot. The traceability report then shows every job and shipment that used the heat.
Does Odoo handle nesting and remnants?
Odoo does not nest parts; that stays in your CAM or nesting software. Usable drops can be recorded as by-products at the cutting step and return to stock as their own lots, so buyers see them before ordering new plate.
How does Odoo handle outside processing like galvanizing or powder coating?
With the Subcontracting app. The outside step becomes a subcontracted BOM: Odoo sends the parts to the vendor, tracks them while they are out and receives them back, with the vendor's charge added to job cost.
Can Odoo do job costing for a job shop?
Yes. Each job carries its material at actual cost, operator time from the shop floor and any outside processing. The manufacturing order compares expected and real cost, and analytic accounts roll jobs up by customer or project.
How long does an Odoo implementation take for a fab shop?
Our closest published case, an 85-person custom-parts manufacturer with 340 BOMs and 12 work centers, went live on Odoo MRP in 14 weeks. A shop with many open jobs, complex routings or several outside processors can take longer. Your proposal states your date and one fixed price before kickoff. We use AI across configuration, development and testing to shorten delivery.
How much does Odoo ERP for metal fabrication cost?
It depends on the apps, the number of routings and work centers, and the data you bring. We do not publish a rate card. We quote one fixed price within five business days of scoping, and it only changes if the scope does.
Start with a 30-minute call.
Bring your routing list, your outside processors and one job you think lost money.
Or email sales@octagotech.com- USA +1 917 254 9416
- India +91 8153897751